Electronic Components Distributor
Home > blog > Integrated Circuits (ICs) > TMP513AID Part Number Details

TMP513AID Part Number Details

Author: Tanssion Date: 2023-05-18 Hits: 141

The TMP513AID is a specific part number belonging to the TMP513 family of temperature sensors and system monitors manufactured by Texas Instruments. Here are some details about the TMP513AID part:

TMP513AID

1.Manufacturer: Texas Instruments


2.Part Number: TMP513AID


3.Device Type: Temperature Sensor and System Monitor


4.Package Type: 8-Pin SOIC (Small Outline Integrated Circuit) Package


5.Temperature Measurement: The TMP513AID is capable of measuring temperature using an on-chip temperature sensor.


6.System Monitoring: In addition to temperature measurement, the TMP513AID provides various system monitoring functions, including monitoring of voltage levels and other analog inputs.


7.Digital Interface: The TMP513AID communicates with the host system through a digital interface, such as I2C or SMBus, allowing for easy integration and control within digital systems.


8.Features: The TMP513AID offers features such as programmable overtemperature limits, fault detection, and alarm functionality.


9.Power Supply: The TMP513AID typically operates from a single power supply voltage in the range of 2.7V to 5.5V.


10.Accuracy: The TMP513AID provides accurate temperature measurements and system monitoring with high precision.


11.Application Areas: The TMP513AID is commonly used in a wide range of applications, including consumer electronics, industrial equipment, automotive systems, and other temperature-sensitive systems.


Please note that the above details are general specifications and may vary depending on the version or revision of the TMP513AID part. It is recommended to refer to the official datasheet and documentation provided by Texas Instruments for precise and up-to-date information on the TMP513AID part.


The TMP513AID is a temperature sensor and system monitor manufactured by Texas Instruments. Here are some characteristics associated with the TMP513AID part:


1.Temperature Accuracy: The TMP513AID provides accurate temperature measurements with a typical accuracy of ±1°C. This ensures reliable temperature monitoring and control.


2.Temperature Resolution: The TMP513AID offers high-resolution temperature measurements, typically achieving resolutions as fine as 0.0625°C. This allows for precise temperature monitoring, particularly in applications that require detailed temperature control.


3.Programmable Features: The TMP513AID may have programmable features, such as programmable overtemperature limits, fault detection thresholds, and alarm functionality. These programmable features provide flexibility in configuring the device according to specific application requirements.


4.Power Supply: The TMP513AID typically operates from a single power supply voltage in the range of 2.7V to 5.5V, making it compatible with a wide range of power supply configurations.


5.Package Type: The TMP513AID is housed in an 8-pin SOIC (Small Outline Integrated Circuit) package. The package provides a compact form factor and facilitates easy mounting on a printed circuit board (PCB).


These characteristics are based on general knowledge about temperature sensors and system monitors, but for precise and up-to-date information about the TMP513AID, it is recommended to refer to the official datasheet and documentation provided by Texas Instruments. The datasheet will provide detailed information on the specific characteristics, electrical specifications, and performance parameters of the TMP513AID part number.


Tags:

Frequently Asked Questions

1、Product parameters for part number TMP513AID
Here are the key product parameters for the TMP513AID part number: 1.Temperature Accuracy: The temperature accuracy of the TMP513AID is typically within ±1°C. 2.Temperature Resolution: The temperature resolution depends on the specific configuration and settings. It can achieve resolutions up to 0.0625°C. 3.Power Supply: The TMP513AID typically operates from a single power supply voltage in the range of 2.7V to 5.5V. 4.Package Dimensions: The 8-pin SOIC package has specific dimensions outlined in the datasheet, including pin spacing and package dimensions for PCB mounting. It's important to note that the parameters mentioned above are general specifications and can vary depending on the version or revision of the TMP513AID part. For detailed and up-to-date information on the product parameters, it is recommended to refer to the official datasheet and documentation provided by Texas Instruments for the TMP513AID part. The datasheet will provide precise information about the part's parameters, electrical
2、Package type of the product with part number TMP513AID
The TMP513AID is typically available in an 8-pin SOIC (Small Outline Integrated Circuit) package. SOIC packages are a popular choice for integrated circuits due to their compact size and ease of mounting on printed circuit boards (PCBs). The 8-pin SOIC package has a narrow body with a pitch of 1.27mm (0.05 inches) between pins. The package dimensions and pin configuration for the TMP513AID can be found in the official datasheet provided by Texas Instruments. The datasheet will provide precise details on the package dimensions, pinout, and recommended PCB layout for proper soldering and integration into your application. It's important to note that while the TMP513AID is commonly available in an 8-pin SOIC package, it's always recommended to refer to the official datasheet and documentation provided by Texas Instruments for the most accurate and up-to-date information on the specific package type associated with the TMP513AID part number. The datasheet will provide detailed information about the pinout, package dimensions, and other relevant package specifications.

Leave a Comment

Related Articles

Authors