Electronic Components Distributor
Home > blog > Integrated Circuits (ICs) > LTC4270BIUKG#PBF Part Number Details

LTC4270BIUKG#PBF Part Number Details

Author: Tanssion Date: 2023-06-05 Hits: 106

The LTC4270BIUKG#PBF is a specific part number within the LTC4270 series of devices manufactured by Analog Devices. Here are some details about this part:

LTC4270BIUKG#PBF

Manufacturer: Analog Devices

Part Number: LTC4270BIUKG#PBF


Key Features of LTC4270BIUKG#PBF:


1.Power Sourcing Equipment (PSE) Controller: The LTC4270BIUKG#PBF is a PSE controller designed for Power over Ethernet (PoE) applications.


2.IEEE 802.3at Compliance: It meets the requirements of the IEEE 802.3at standard, which defines the specifications for PoE+ power sourcing equipment (PSE) and powered devices (PD).


3.Integrated Switching FET Drivers: The device includes integrated drivers for external power MOSFETs, simplifying the design and reducing the external component count.


4.Advanced Power Management Features: It incorporates advanced power management features such as per-port power limiting, priority-based port power allocation, and current monitoring.


5.Surge and Fault Protection: The LTC4270BIUKG#PBF includes protection features such as surge protection, overcurrent detection, and overtemperature detection to enhance system reliability and safety.


6.Comprehensive Diagnostics: It offers diagnostics and fault reporting capabilities, allowing monitoring and reporting of critical operating parameters, including current, voltage, and temperature.


7.Wide Operating Temperature Range: The LTC4270BIUKG#PBF is designed to operate over a wide temperature range, making it suitable for various environmental conditions.


Please note that these are general features associated with the LTC4270 series, and specific details may vary for the LTC4270BIUKG#PBF variant. For accurate and up-to-date information about the LTC4270BIUKG#PBF, I recommend referring to the datasheet provided by Analog Devices. The datasheet will provide comprehensive details about the part's electrical characteristics, pin configuration, recommended operating conditions, and other relevant information specific to this part number.


Here are some common product parameters associated with the LTC4266IGW#TRPBF:


1.Input Voltage Range: The LTC4266IGW#TRPBF typically operates within a specific input voltage range, which can vary based on the application and configuration.


2.Output Voltage Range: The LTC4266IGW#TRPBF provides regulated output voltages to power connected devices or loads. The specific output voltage range may depend on the application and requirements.


3.Maximum Output Current: This parameter indicates the maximum current that the LTC4266IGW#TRPBF can provide to the connected devices or loads.


4.Operating Temperature Range: The LTC4266IGW#TRPBF is designed to operate within a specific temperature range, which is typically specified in degrees Celsius (°C) or degrees Fahrenheit (°F).


5.Efficiency: The efficiency of the LTC4266IGW#TRPBF refers to its ability to convert input power to output power efficiently. It is usually expressed as a percentage.


6.Supported PoE Standard: The LTC4266IGW#TRPBF may comply with specific PoE standards, such as IEEE 802.3af or IEEE 802.3at, which define the power levels and communication protocols for PoE applications.


Please note that these parameters are general and may not cover all the specific details and specifications of the LTC4266IGW#TRPBF. For accurate and up-to-date information, I recommend referring to the official datasheet provided by Analog Devices for the LTC4266IGW#TRPBF part. The datasheet will provide comprehensive details regarding the part's parameters, pin configuration, recommended operating conditions, and other relevant information specific to this part number.


Tags:

Frequently Asked Questions

1、Package type of the product with part number LTC4266IGW#TRPBF
The package type for the LTC4266IGW#TRPBF is a 24-lead 4mm x 4mm QFN (Quad Flat No-Lead) package. QFN packages are popular for their small size, low profile, and good thermal performance. They have a square or rectangular shape with leads on all four sides of the package, which allows for efficient routing of traces on the PCB. The absence of leads underneath the package improves thermal dissipation and makes them suitable for applications where space and thermal considerations are important. Please note that package types can sometimes vary, so it's always best to refer to the datasheet or contact the manufacturer for the most accurate and up-to-date information regarding the package type of a specific part number.

Leave a Comment

Related Articles

Authors