The part number LTC1392CN8#PBF refers to a specific integrated circuit (IC) manufactured by Linear Technology (now part of Analog Devices). Here are some details about the LTC1392CN8#PBF:
1.Manufacturer: Linear Technology (Analog Devices)
2.Part Number: LTC1392CN8#PBF
3.Package Type: The "CN8" in the part number indicates an 8-pin plastic DIP (Dual In-Line Package) package. This package type is common for through-hole mounting on printed circuit boards.
4.RoHS Compliance: The "#PBF" at the end of the part number indicates that the IC is RoHS-compliant, meaning it adheres to restrictions on hazardous substances.
5.Function: The LTC1392CN8#PBF is a precision quad operational amplifier (op-amp) with rail-to-rail inputs and outputs. Op-amps are widely used in analog circuit applications for amplification, signal conditioning, and filtering purposes.
6.Features: The LTC1392CN8#PBF offers features such as low input offset voltage, low input bias current, and low input offset voltage drift. It operates on a single or dual power supply, typically within a specified voltage range.
7.Temperature Range: The LTC1392CN8#PBF is designed to operate over a certain temperature range, typically from -40°C to +85°C or wider, depending on the specific variant.
8.Datasheet: For more detailed information about the electrical characteristics, pinout, and recommended operating conditions of the LTC1392CN8#PBF, you can refer to the official datasheet provided by Analog Devices. The datasheet will provide comprehensive information about the specific IC variant and its capabilities.
It's worth noting that as an AI language model, I don't have real-time access to the latest product information. Therefore, I recommend verifying the details and specifications of the LTC1392CN8#PBF by referring to the official datasheet or contacting Analog Devices directly for the most accurate and up-to-date information.
Here are some common product parameters for the LTC1392CN8#PBF op-amp:
1.Supply Voltage (Vcc): Typically operates on a single or dual power supply in the range of ±2.25V to ±18V.
2.Input Offset Voltage: The maximum voltage difference between the two input terminals, typically specified in millivolts (mV).
3.Input Bias Current: The average current flowing into the input terminals, typically specified in nanoamperes (nA).
4.Gain Bandwidth Product (GBW): The frequency at which the open-loop gain of the op-amp drops to 1, typically specified in megahertz (MHz).
5.Slew Rate: The maximum rate at which the output voltage can change, typically specified in volts per microsecond (V/μs).
6.Input and Output Voltage Range: The range of input and output voltages that can be accommodated by the op-amp, typically specified in volts (V).
7.Common Mode Rejection Ratio (CMRR): The ability of the op-amp to reject common-mode signals, typically specified in decibels (dB).
8.Supply Current: The current drawn from the power supply by the op-amp, typically specified in milliamperes (mA).
9.Operating Temperature Range: The temperature range over which the op-amp can operate reliably, typically specified in degrees Celsius (°C).
It's important to note that the above parameters are general and can vary depending on the specific variant of the LTC1392CN8#PBF op-amp. For precise and detailed information, I recommend referring to the official datasheet provided by Linear Technology (Analog Devices). The datasheet will provide comprehensive and accurate information about the specific electrical characteristics, performance parameters, pinout, and recommended operating conditions of the LTC1392CN8#PBF op-amp.