Electronic Components Distributor
Home > blog > Integrated Circuits (ICs) > LT1016CP Part Number Details

LT1016CP Part Number Details

Author: Tanssion Date: 2023-05-24 Hits: 135

The LT1016CP is a specific part number for an integrated circuit (IC) manufactured by Linear Technology, which is now part of Analog Devices. Here are the details for the LT1016CP:

LT1016CP

1.LT: This prefix indicates that the part is manufactured by Linear Technology, now known as Analog Devices.


2.1016: This number identifies the specific part as the LT1016 series.


3.C: The "C" in the part number indicates the package type. In this case, "C" typically refers to a DIP (Dual Inline Package), which has through-hole pins for mounting on a circuit board.


4.P: The "P" suffix may refer to a specific temperature grade or package variant. The exact meaning can be found in the datasheet or technical documentation for the specific part number.


Please note that for accurate and up-to-date information, it is recommended to refer to the datasheet provided by Analog Devices for the LT1016CP. The datasheet will provide comprehensive information about the IC, including its electrical characteristics, pin configuration, timing specifications, and other relevant details.


The LT1016CP is an integrated circuit (IC) manufactured by Linear Technology, which is now part of Analog Devices. Here are some general parameters typically associated with the LT1016CP:


1.Supply Voltage Range: The LT1016CP typically operates with a supply voltage (VCC) ranging from 2.7V to 15V.


2.Input Voltage Range: The IC can handle input voltages ranging from the negative supply voltage (V-) to VCC+0.3V.


3.Input Offset Voltage: The LT1016CP has a low input offset voltage, typically in the range of a few millivolts.


4.Input Bias Current: The IC exhibits low input bias current, typically in the nanoampere range.


5.Output Current: The LT1016CP is capable of driving output currents up to several tens of milliamperes.


6.Response Time: The IC has a fast response time, typically in the nanosecond range.


7.Package Type: The "CP" suffix in the part number indicates the package type. In this case, "CP" typically refers to a plastic dual inline package (PDIP), which has through-hole pins for mounting on a circuit board.


Please note that these are general parameters, and the specific electrical characteristics, pin configuration, and other detailed information can be found in the datasheet provided by Analog Devices for the LT1016CP. The datasheet will provide comprehensive information about the IC, including its electrical specifications, pin configurations, timing characteristics, and other relevant details.


Tags:

Frequently Asked Questions

1、Characteristic of the product with part number LT1016CP
The LT1016CP is a high-speed comparator integrated circuit (IC) manufactured by Linear Technology, now part of Analog Devices. Here are some characteristics of the LT1016CP: 1.High-Speed Operation: The LT1016CP is designed for high-speed applications and offers fast response times, typically in the range of nanoseconds. It is well-suited for applications requiring rapid signal comparison or detection. 2.Low Input Offset Voltage: The LT1016CP features low input offset voltage, which minimizes errors in signal comparison. This characteristic ensures accurate and precise operation in various applications. 3.Wide Input Common-Mode Range: The IC has a wide input common-mode range, allowing it to accept signals that extend beyond the supply rails. This characteristic enables flexible operation with different signal levels. 4.Output Current Capability: The LT1016CP is capable of delivering high output current, making it suitable for driving capacitive loads or other circuit elements with low impedance. 5.Wide Supply Voltage Range: The IC can operate with a wide supply voltage range, typically from 2.7V to 15V. This characteristic allows for compatibility with various power supply configurations. 6.Low Power Consumption: The LT1016CP is designed to minimize power consumption, making it suitable for battery-operated or low-power applications. 7.Package Type: The "CP" suffix in the part number typically refers to a plastic dual inline package (PDIP), which has through-hole pins for easy mounting on a circuit board. Please note that these are general characteristics of the LT1016CP, and for more detailed and precise information, it is recommended to refer to the datasheet provided by Analog Devices for the LT1016CP. The datasheet will provide comprehensive information about the IC, including its electrical characteristics, pin configurations, timing specifications, and other relevant details.
2、Replacement model of the product with part number LT1016CP
The LT1016CP is a high-speed comparator integrated circuit (IC) manufactured by Linear Technology, now part of Analog Devices. While there may not be an exact replacement model with the same part number, Analog Devices offers a wide range of high-speed comparators that could serve as potential alternatives. Here are a few options: 1.LT1716: This is a high-speed comparator offered by Analog Devices. It has similar performance characteristics to the LT1016CP and is designed for fast response times and low input offset voltage. 2.LT1719: Another alternative from Analog Devices, the LT1719 is a high-speed comparator with low input offset voltage and fast response times. It is suitable for applications requiring precise signal comparison. 3.MAX9111: This is a high-speed comparator from Maxim Integrated. It offers low input offset voltage and fast response times, making it a potential replacement option for the LT1016CP. When selecting a replacement model, it is important to consider the specific requirements of your application, such as input voltage range, supply voltage, response time, and other performance parameters. Carefully review the datasheets and specifications of the alternative comparators to ensure compatibility with your application needs. Additionally, it is always recommended to consult the manufacturer's datasheets and reach out to their technical support or authorized distributors for assistance in finding the most suitable replacement for your specific application.
3、Package type of the product with part number LT1016CP
The package type for the product with part number LT1016CP is a 8-pin plastic dual inline package (PDIP). PDIP packages have through-hole pins that allow for easy mounting on a circuit board. The package dimensions and pin configuration of the LT1016CP in PDIP package can be found in the datasheet provided by Analog Devices. Please refer to the datasheet or manufacturer's documentation for precise package information, including mechanical specifications and pinout details.

Leave a Comment

Related Articles

Authors