The ADG3300BRUZ is a specific part number from Analog Devices, Inc., referring to the ADG3300, a low-voltage, level-translating, bidirectional I2C switch. Here are some details regarding this specific part:
Product: ADG3300BRUZ
Manufacturer: Analog Devices, Inc.
Description: The ADG3300BRUZ is an I2C switch designed to facilitate level translation between low-voltage devices. It provides bidirectional voltage translation between two different I2C voltage levels, allowing communication between devices with different operating voltage levels. The ADG3300BRUZ is commonly used in applications where there is a need to interface between devices operating at different voltage levels while maintaining compatibility with the I2C communication protocol.
Key Features:
1.Bidirectional Level Translation: The ADG3300BRUZ allows bidirectional voltage translation between two different I2C voltage levels, enabling communication between devices with different voltage requirements.
2.Low-Voltage Operation: It operates with low supply voltages, typically in the range of 1.6V to 3.6V, making it suitable for use in low-power and battery-powered applications.
3.Fast Switching Speed: The ADG3300BRUZ offers fast switching speeds, ensuring efficient data transfer and minimal signal delay in I2C communication.
4.Low Power Consumption: It is designed to operate with low power consumption, contributing to overall system energy efficiency and extending battery life in portable applications.
5.ESD Protection: The ADG3300BRUZ incorporates built-in electrostatic discharge (ESD) protection measures to prevent damage from electrostatic discharge events during handling or operation.
6.Small Package: The ADG3300BRUZ is available in a small form factor package, such as a 16-lead TSSOP (Thin Shrink Small Outline Package), providing ease of integration into space-constrained designs.
Please note that specific technical details, such as pin configurations, operating specifications, and electrical characteristics, may vary. For comprehensive and detailed information, I recommend referring to the datasheet or contacting Analog Devices directly for the most accurate and up-to-date information on the ADG3300BRUZ I2C switch.
Here are some general overview of the typical product parameters for the ADG3300BRUZ:
1.Supply Voltage Range: The ADG3300BRUZ typically operates with a supply voltage range of 1.6V to 3.6V. This allows compatibility with low-voltage systems and supports low-power operation.
2.I2C Voltage Translation: The ADG3300BRUZ is specifically designed to provide bidirectional voltage translation for I2C communication. It allows for level shifting between two different voltage levels, enabling communication between devices operating at different voltages.
3.Number of Channels: The ADG3300BRUZ typically features a single channel. This means it can translate the voltage level for one bidirectional I2C bus.
4.Switching Speed: The ADG3300BRUZ offers fast switching speeds, ensuring efficient data transfer and minimal signal delay during I2C communication. The specific switching speed or rise/fall time can be found in the product datasheet.
It's important to note that the parameters provided here are general characteristics, and for specific and detailed information, it is recommended to refer to the datasheet provided by Analog Devices or contact their customer support directly. The datasheet will provide comprehensive information on electrical specifications, pin configurations, timing characteristics, and other relevant parameters for the ADG3300BRUZ.
Tags:ADG3300BRUZ